Consumer Unit Replacement and Upgrades
A consumer unit replacement is often needed when an old fuse box or outdated fuse box cannot cope with modern appliances and higher power use.
We remove the old unit, check the supply, assess the existing wiring and fit a new consumer unit with the right protection for all the circuits.
This may include RCD protection, RCBOs, circuit breakers, clear circuit labels, earth bonding and a surge protection device where required.
We work neatly, keep disruption low and explain the installation process before power is restored. Once the consumer unit is installed, we complete testing and provide the certification needed for peace of mind.
Fusebox Replacement Services
Our fuse box replacement service is planned around your property, number of circuits and how you use electricity. We start with an electrical inspection, visual checks and load assessments to ensure the replacement consumer unit is suitable.
We then carry out fuse box installation, fit residual current devices, miniature circuit breakers or RCBO protection as needed, and label individual circuits clearly. We keep the work area tidy and explain the new safety features. After installation, we complete full testing, confirm safe earthing and issue the correct electrical installation certificate.
Consumer Unit Replacement
Fuse Box Upgrade
RCD Installation
RCBO Installation
Surge Protection Installation
Earthing and Bonding Checks
Load Testing and Checks
Fault Finding Before Replacement
Circuit Labelling and Schedules
Electrical Testing and Certification
Fuse Box Replacement for Landlords
Landlords often need a fuse box replacement when an electrical installation condition report highlights an existing consumer unit, old wiring or a traditional fuse box that may not meet current safety standards. A modern consumer unit helps protect tenants and reduces the risk of tripping, overheating, faulty appliances and electrical fires.
We can arrange access with tenants and keep power downtime as short as possible. Before installing the new fuse box, we check earthing, bonding, circuit condition and any fault finding needed.
After installation, we test each circuit, label the consumer unit clearly and provide certification for your records. This helps landlords, housing associations and the private rented sector show compliance during inspection and maintenance.
Fuse Box Testing and Certification
Testing and certification are a key part of any fuse box replacement. Once the new consumer unit is fitted, our certified electricians carry out electrical tests on every circuit to confirm the system is safe. This includes insulation, earth continuity, polarity and checks that protective devices switch off within the right time. We also test RCD and RCBO functions.
We confirm earthing and bonding, and ensure circuit labels match the results. When everything meets the required safety standards, we provide the correct certificate, which may include an EIC, part P certification and building regulations compliance certificate where applicable. We can explain the results in plain language, so you know what was checked.
find out more about our services
PAT Testing Kensington
We provide PAT testing to help keep electrical items safe to use. We test portable appliances, record the results, and label items clearly. This helps homes, offices, and landlords meet safety duties and spot problems early. words.
EV Charger Installations Kensington
We install EV chargers at homes and workplaces, set up for safe daily use. We check your supply, cable routes, and best placement, then fits the charger neatly. We explain how it works and make sure it is tested before we leave.
Fusebox Replacement Kensington
Old fuseboxes can cause faults and safety risks. We replace old fuseboxes with modern consumer units, using proper protection and clear labelling. We test the circuits, tidy the wiring, and provide the right paperwork for the work completed.
Frequently asked questions
about fusebox replacement...
A fusebox replacement means removing an old fusebox and installing a modern consumer unit. This helps improve safety and gives your property better protection against faults.
Yes. Fusebox replacement is available for homes, flats, landlords, businesses and commercial properties across Kensington, Chelsea, Westminster and nearby London areas.
You may need a replacement if your fusebox is old, damaged, overloaded, has rewireable fuses, trips often or does not meet current safety standards.
A fusebox is an older board that often uses fuses. A consumer unit is the newer unit and uses modern circuit breakers for safer control.
Most cases can be completed in one day. Larger homes, complex installations or extra wiring work may require more time, depending on property size.
Yes. Power must be switched off while the old fuse box is removed and the new consumer unit is installed. Your electrician will explain what to expect.
Testing is carried out after installation to check that the unit, circuits and protection devices work correctly. You will receive the required documentation.
The work is usually tidy and controlled. Some minor disruption may occur, but a qualified electrician will aim to keep your home clean and safe.
Frequent tripping can mean a fault, overloaded circuit or ageing electrical system. An inspection can confirm whether replacing the fuse box is needed.
Fuse box installation can be carried out in flats, subject to access, building rules and the condition of the electrical supply.
Landlords must keep electrical installations safe. A modern consumer unit can help meet legal requirements, especially where an old fuse box is unsafe.
Yes. After replacement, testing and handover, you should receive the correct electrical installation certificate and any part P notification where required.
Yes, in many cases consumer unit installation is classed as notifiable work under part P building regulations in England. A registered electrician can self certify the work.
A high integrity consumer unit is designed to give some circuits their own protection, so one circuit fault does not affect the same level of power across the whole unit.
The cost depends on the property, number of circuits, location, materials, labour and complexity. The final price depends on checking the existing electrical system.
Yes. We can provide free advice and a free no obligation quote. Multiple quotes can also help you compare price, workmanship and what is included.
You can contact us by phone or online with your property details. We can arrange a visit, discuss the work and schedule a suitable date.